system guide experiments with XLISP  structure and system resource The application of ISP downloading part 4 Guidance of simulated operations
xlisp.exe downloaddemoprogusbdriver2.0 downloadxlisp-quickstart.pdfxl600 pdf schkeil  demo software download:

ebay store    

xl600+ mcu development board system introduction

xl600+ is an integrated demo system for study and development of 8051 Microcontroller, which is provided with four functions of experimental instrument, programmer, simulation interface and ISP download cable. Enclosed with control CPU and combined with programming software which has independent intellectual property rights .With useful implemented peripherals, plentiful practical code examples and a broad set of additional add-on USB 2.0 IN-CIRCUIT ATMEL 8051 DEVELOPMENT BOARDboards (1602LCD , Stepper Motor, Real Time Clock DS1302,ADC, DAC, , etc.), MikroElektronikadevelopment boards make fast and reliable tools thatcan satisfy the needs of experienced engineers and beginners alike.


All pins are connected to IDC connectors for further expansion.

4*4 buttons for program developing needs.

1 output lines with relays (up to 1A).

The SN74LS47 are Low Power Schottky BCD to 7-Segment Decod-er/Drivers consisting of NAND gates

8 seven-segment digits in multiplex mode

8 LED's are provided.


Digital circuit chip


Digital circuit chip


Digital circuit chip


Digital circuit chip

8-bit voltage AD converter for applications in measure - regulating devices.

DAC - Digital - Analog Converter available for testing DA conversion

Infrared Remote Control Receiver

Stepper Motor Driver

Buzzer voice.(use DuPont wire can be connected to the arbitrary I/O port)

USB comm. connector for MCU with USB facilities.

PS2 connector makes possible direct connection between XL600+ and PC keyboard.

Reset circuit.

Real Time Clock DS1302 with battery supply.

1602-character LCD–internal 5*7 lattices, to display 16*2-character


XL600+ is easy to use Atmel 8051 development system. XL600+ has many features that makes your development easy. You can between USB Power supply. Easy8051B also supports Graphic LCD.

The smart choice for 8051 microcontrollers
XL600+ allows the 8051 MCU to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.

Features of XL600+ system:

. Open modular designEach module is designed to connect to I/O port of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved through dupont thread. All I/O ports are open externally with output socket. Expansion is easily accomplished.
Outlook of XL600+ (dark PCB for double faces, the SMT art makes it maybe the most elegant MCU experiment system you have ever seen, luxurious and noble, you will love it at the first sight. )



1.communication and downloading
2. power supply
3. CPU simulation
4. Analog to Digit converter ADC0804
5. Digit to analog converter DAC0832
6. LCD display 1602LCD
7. 8bit digit led
8. The SN74LS47 are BCD to 7-Segment
9. parallel in serial out74LS165
10. 3-8 decoder74LS138
11 serial in parallel out74LS164
12 inverter (74LS14)
13 step motor
14. 93C46
15 24C02
16 speaker
17 remote
18 18B20
19 8 switch
20 8way indicator
21 matrix switches
22 1 way relay output
23 DS1302
24 NE555
25 PS2
26 Crystal select
28 dig switch

A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and the many practical examples that we have provided allow a quick start in programming 8051.

 More ISP downloading options:

With complementary software, XLISP programmer represents a great tool for . The microcontroller connects to the XLISP programmer via 6 lines, two of which are +5V and GND and others are MOSI, MISO, SCK and MCLR. Unlike programmers whose operation is based on bootloads (and which need to give away part of their memory to a bootload program) XLISP programs the microcontroller externally so that the entire memory is available for the programmer.

Lists of chips it supports:
ATmega323,ATmega323L,ATmega64,ATmega64LATmega8,ATmega8L,ATmega8515,ATmega8515LATmega8535,ATmega8535L ATtiny12,ATtiny12L,ATtiny13,ATtiny13LATtiny15,ATtiny15L,ATtiny22,ATtiny22L,ATtiny26,ATtiny26L

Equipped with 40pin simulator head and SST89E516 Emulation chip:

It could be used as an independent simulator for 51 MCU.  With the help of KEIL software, it supports on-line debugging like single step execution, break point and full run

The new SoftICE software utility was specifically developed to support the FlashFlex
SST's SoftICE is a downloadable micro-controller-resident software utility that provides in-circuit emulation capability through the Keil Monitor51 software, a popular third-party Windows monitor interface. It is the only software utility on the market today that provides "true" in-circuit emulation without the need for a "bondout" chip or on-board "hooks" circuitry. It helps debug users' target software in real-time, thus providing engineers with an in-circuit development tool, which is effective, easy to use and requires no extra emulator hardware. SoftICE has most of the features of sophisticated hardware emulators.
Some important features are:
Full access to every Flash memory location, RAM location, and SFR for READ/WRITE/ERASE operations.
Inline Assembler allows for on-the-fly change of test code. Any changes made using the inline assembler are implemented immediately on the hardware and in real-time.
SoftICE works invisibly with the user-friendly Keil Monitor51 driver to ensure the user the most comfortable code development environment.

 download the SoftICE User's Guide.

The auction includes :
USB cable
AT89S52 Chip*2
Remote control
SST89E516 Emulation chip
DIP40 Emulation port
ISP cable
Dupont thread expansion connection 20x wire
CD-ROM (Programmer Driver , English version PDF User manual , Board Schematic , Sample code (C / ASM) .)
Compatible for OS including Windows 98, Windows 2000/NT, Windows XP , Windows 2003 and Vista

System requirement and specification:
WINDOWS98/ME/2000/XP/2003/vista operation system.
Minimum 50MB space in hard disk.
At least one USB port
PCB size: 185* 130 mm
package size: 190*320* 80 mm
package weight: 1.6 kilograms

Note: Please payment at the same time leave your telephone number, to facilitate the transport, Thank you!



Postalcode: 518129  TEL:86-755-89603537    FAX:86-755-89956892